Skip to content
Xinyuanyi

Xinyuanyi (Tianjin) Semiconductor Equipment Co., Ltd.

About Xinyuanyi

Xinyuanyi (Tianjin) Semiconductor Equipment Co., Ltd. works on one problem: getting more tokens out of the accelerators you already own. We add an external all-flash tier beyond GPU memory and host RAM that catches the KV cache overflowing during inference, so it can be read back when needed instead of being recomputed by the GPU.

Updated

What we do

The product is the FX series of all-flash NVMe-oF arrays, developed on Guangdong Luisuan GP-series hardware and delivered with a vLLM + LMCache KV cache tiering stack that includes our own LMCache parallel-read patch.

We only publish numbers we have measured. Nine reports, R1–R9, cover three platforms: AMD Instinct MI308X, Huawei Ascend 910B and MetaX N260. Figures from different platforms are labeled separately and never mixed. The patch, orchestration scripts and raw data are packaged as R8 so that third parties can reproduce the results independently.

Products9 test reports

How we treat data

  1. 01

    Every number needs a source

    Key figures on this site carry a report ID. If we cannot attach an ID to a number, we do not publish it.

  2. 02

    Platforms are reported separately

    Results on MI308X, Ascend 910B and MetaX N260 are documented and labeled individually, never merged into a better-looking headline.

  3. 03

    Baselines are stated

    A speed-up means nothing without its baseline. Comparing with a local NVMe drive and comparing with full recompute are two different denominators, and we do not mix them.

  4. 04

    Reproduction material is handed over

    The patch, scripts and raw data are packaged as R8, so third parties can rerun the tests instead of trusting our charts.

  5. 05

    Limits are disclosed

    Short, low-concurrency conversations benefit little. We say so before you start a project.

Test jointly first, decide afterwards

Every engagement starts with a gated joint test of about 10 weeks. Four gates are passed in sequence; if one is missed, the project stops there, so you never pay for a benefit that was not demonstrated.

  1. G1Week 2

    Delivery acceptance

    All materials delivered and inspected; every array passes its power-on self-test with all 24 drives recognized.

  2. G2Week 4

    Single-node baseline

    The single-node 8-GPU inference baseline is reproduced within ±10% of the R1 figures; a local stress test of one array reaches 83% line efficiency against the measured anchor.

  3. G3Week 7

    Main joint-test gate

    KV tiering must deliver both a TTFT reduction of ≥25% and a throughput gain inside the measured +29–40% band; with 8 nodes sharing one array, read-back bandwidth approaches the NIC ceiling.

  4. G4Week 10

    Stability and sign-off

    72 hours of continuous load without interruption; single-drive and single-link fault injection stays invisible to the workload; a signed joint-test report is issued.

The full costing model is provided as Python source after an NDA, so you can rerun it with your own parameters.

Company details

CompanyXinyuanyi (Tianjin) Semiconductor Equipment Co., Ltd.
LocationTianjin, China
ContactWang Limin
Phone+86 131 6181 8898
Emailmingxin@agentmail.toThe inbox is monitored and triaged by AI around the clock

A note on names: in earlier test-report filenames FX100 appears as AISSD5000, and before that as WS5000 / GP5000; some reports are signed “Mingxin”. They all refer to the same product. This site uses the FX naming throughout (FX100 / FX200 / FX300 / FX400), while report entries keep their original titles so you can cross-check.

Test jointly first, decide afterwards

Test jointly first, decide afterwards

Every engagement starts with a gated joint test of about 10 weeks. Four gates are passed in sequence; if one is missed, the project stops there, so you never pay for a benefit that was not demonstrated.

Contact
Wang Limin
Phone
+86 131 6181 8898
Email
mingxin@agentmail.to

The inbox is monitored and triaged by AI around the clock